Fireplace Edge Guard - 268cm Extra Thick

✅ Key Features

• Extra-thick NBR foam safety guard for fireplaces and steps

• 268 cm total coverage: 250 cm edge strip + 2 corner guards

• Non-toxic and fire-resistant (not fireproof)

• Easy peel-and-stick install with pre-applied 3M tape

• Designed for hearths and raised stone/brick edges

• Smooth black finish blends with most fireplace styles

• Easy to remove and clean

✅ Fire Safety Disclaimer

This product is made from fire-resistant NBR foam, which does not easily ignite or support flame. However, it is not fireproof.

Do not apply this product to any surface that exceeds 40°C — i.e. surfaces that feel too hot to touch for humans.

Suitable for hearths that remain warm but comfortable to the touch during fire use. Not suitable for hearths with open flames, hot embers, or surfaces that become hot, such as stove doors, fire openings, or gas fire outlets.

For use only on decorative, unused, or low-heat hearths.

✅ Specs & Technical Info

• Total Length: 268 cm (250 cm straight + 2 corners)

• Foam Dimensions: 3 cm thick x 7 cm high (10 cm total coverage with overlap)

• Material: Fire-resistant NBR foam (non-toxic)

• Colour: Black

• Adhesive: 3M double-sided tape (included and pre-applied)

• Cut to Size: Yes

• Minimum Hearth Edge Height for Fit: 3 cm

• Max Surface Temperature for Application: 40°C

✅ Installation Notes (for fitting guide tab or insert)

• Ensure surface is clean, dry, and dust-free before application

• Do not apply to painted or delicate surfaces

• Allow 24 hours for adhesive to bond fully before testing hold

• For rough stone or high-traffic areas, additional adhesive may be used

• Not suitable for use near flames or on surfaces that get hot during fireplace use

✅ Removal Instructions

To remove, slowly peel back the foam from the edge. Any remaining tape can be lifted with a plastic scraper and removed using vegetable oil or a safe adhesive remover.